ZEGA Pro aluminium pannier system 31/38 litres with stainless steel rack for Honda CRF1000L Africa Twin
The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring
- ready fitted fixing kits - sturdy connecting bar - original indicators can be re-used - overall width: 99 cm - Stainless steel rack
Pannier system: Robust stainless steel pannier frame made from 18 mm diameter steel tube with a 2 mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.
ZEGA Pro: In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.
Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!
The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.
The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.
The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.
The advantages at a glance: - automatic locking prevents the catches from opening accidentally - fitted locks can be replaced or added later without drilling or filing - simultaneously locking fitted locks ar...文字数制限により省略しております。詳細はメーカーサイト等をご確認ください。
●メーカー名:ツアラテック / TOURATECH(ツラーテック)
●商品名:ZEGA Pro 『アルマイトブラック』 【31L+38L】 アルミパニアシステム Honda CRF1000L Africa Twin 【ブラックフレーム】
●メーカー品番:tt_01-402-5782-0
●JANコード:4573209311353
商品の保証は、メーカー保証書の内容に準じます。
●適合車種
Honda・CRF1000L Africa Twin
●商品内容
■ZEGA Pro「アルマイトブラック」アルミパニアケース 左右2個セット【31L+38L】
■車種別専用パニアフレーム1台分【ブラック】
■左右リリースキャッチ用キーシリンダー×2
●カラー
アルマイトブラック
●仕様
取付時の車幅:99cm
●特徴
【ステンレス製パニアフレーム】
フレーム本体色:【シルバー】or【ブラック】
-車両に合わせた専用設計で車体にしっかりと取り付け可能
-直径18mm、厚さ2mmの頑丈なステンレス鋼を使用、車体のガードを兼ねる頑丈さ
-必要な部品は全て同梱されており、容易に取り付け可能
【ZEGA Proパニアケース】
-堅牢性、デザイン性、実用性のいずれにおいても最高傑作の旅バイク用パニアケース
-厚さ1.5mmのアルミニウム製で重量はとても軽く、防水・防塵性能はトップクラス
-目的地では踏み台にしたり、イスとして座っても壊れない頑丈なつくり
-溶接は美観を損なわないよう内側からのみ施され、高品質なリベットで頑強に製造
-美しい曲面はデザイン性だけでなく耐衝撃性にも優れ、万一へこんでも修復が容易
-ケースの四隅を守るプロテクターはネジ留めで簡単に取り外して交換が可能
-蓋のロックシステムは走行中に不意に開くことを防止する安全設計
-別売りのインテグラルロック4個セット(01-050-0874-0)で施錠も出来て安心
【ZEGA-Pro2とは?】
-ZEGA Proをベースに細部の改良を施した新型モデル
-車体への固定が片手で出来る「リリースキャッチ」機構を採用
-「リリースキャッチ」施錠用ロックはシステムに付属しています
-上部にナイロン製キャリングハンドル
-前後にアクセサリ取付け用のボスを標準装備
-防水性も高められています
☆ケースの表面加工について☆
商品名に【アルマイトシルバー】【アルマイトブラック】と表示のある製品は、本体のアルミ部分を防錆アルマイト加工(アノダイズ)しており、錆びにくくなっております。
表示のない、又は【アルミ無地】という表示の製品は全くの無塗装ですので、新品時は光って綺麗ですが長くお使いになるほど表面が一円玉のように白く錆びるようになります。
また無地のアルミは表面をこすると黒い粉を出す性質があり、インナーバッグ無しで使用すると箱の中のものが黒くなってしまうことがありますが、アルマイト加工したものは内側も全て加工済みですのでこの心配がございません。
ただし、無加工のケースも新品時にはとても光沢があって人気があり、年月とともに錆びていくのもまた味がありますので、お好みでお選びください。
●備考
ツラーテックの誇る世界最強のパニアケース「ZEGA Pro」を車両の左右に取り付けるための(1台分をまとめた)お得なセットです。
【車両への取付に必要な専用パニアラック】と【左右のZEGAケース本体】がセットになっています。
ケースには取り付け用のマウントキットが予め組付け加工済みですので、パニアラックを車両に取り付けてしまえばケースの脱着はすぐに可能です。
ZEGA Pro aluminium pannier system 31/38 litres with stainless steel rack for Honda CRF1000L Africa Twin
The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.
The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring
- ready fitted fixing kits
- sturdy connecting bar
- original indicators can be re-used
- overall width: 99 cm
- Stainless steel rack
Pannier system:
Robust stainless steel pannier frame made from 18 mm diameter steel tube with a 2 mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.
ZEGA Pro:
In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.
Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!
The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.
The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.
The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.
Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.
The advantages at a glance:
- automatic locking prevents the catches from opening accidentally
- fitted locks can be replaced or added later without drilling or filing
- simultaneously locking fitted locks ar...文字数制限により省略しております。詳細はメーカーサイト等をご確認ください。